Archives - Page 2

  • Vol. 8 No. 36 (2022)

    1. Assessment of the major contractors’ selection criteria and their impacts in civil engineering construction projects // 2. Cost of raising soil organic carbon for a quarter-century in a semi-arid turkish plain: Harran Plain // 3. Risk evaluation of belt conveyor accidents using failure modes and effects analysis and event tree analysi // 4. Radiological risk assessment of 238U, 232TH and 40K in the top soils of ahero paddy fields of Kisumu county, Kenya // 5. Spatial assessment of groundwater degradation using physicochemical analysis and GIS: Case study of the basement complex of Ado Ekiti, southwest Nigeria

  • Vol. 8 No. 35 (2022)

    1. Influence of cutting parameters on surface integrity and machining forces in top milling of metallic spraying metal coatings // 2. Localized features in subsoil investigation and implications for foundation works: Case study from Ilora, southwestern Nigeria // 3. Application of methods-time measurement as a tool to improve productivity in a beauty salon // 4. Proposal for insertion of electric vehicles in the transport of loads from a distribution center 

  • Vol. 8 No. 34 (2022)

    1. Heterogeneous LoRaWan deployment for application dependent IOT networks // 2. Heat transfer enhancement in a p-shape finned radial heat sink subjected to natural convection: Thermal significance of slot and dimples in fin // 3. Multi-objective optimization of cutting parameters for finishing end milling Hardox® 450 // 4. Bibliometric review of facilities management and its impact on organizational effectiveness // 5. Infrastructural development in Yewa south local government area in Ogun state, Nigeria 

  • Vol. 8 No. 33 (2022)

    1. Design of a multi-level inverter for applications in distributed generation // 2. Photovoltaic generation prediction using the deep learning long short term memory model // 3. Measurement of radiological parameters in harvested sand in Bungoma county rivers, Kenya // 4. Construction audit-an essential project control function // 5. Assessment of survival strategies of quantity surveying firms during economic turbulence // 6. Radiological measurement of hazardous levels in construction tiles in Bungoma county, Kenya // 7. Transmission network expansion static planning considering security constraints via African Buffalo Algorithm 

  • Vol. 7 No. 32 (2021)

    1. Catchment scale assessment of river-water quality in an ungauged environment // 2. Count of bacteria and yeast in microbial bioproduct using digital image processing // 3. Extension of time (EoT) claims substantiation and associated issues in Complex-Multi Stakeholders’ building construction contracts // 4. Challenges associated with the implementation of insurance in building projects in Nigeria // 5. Development and testing of a hybrid distribution board // 6. Building information modeling (BIM) and quantity surveying consultancy services in Nigeria 

  • Vol. 7 No. 31 (2021)

    1. The integration of DFMA (Design for Manufacturing and Assembly) and Reverse Engineering (ER) Applied to a Landing Gear Redesign // 2. A closed-form solution to multi-level image thresholding // 3. Production of Antimicrobial Compounds using Thermophilic Bacteria Species Bacillus subtilis and Bacillus Tequilensis // 4. Effects of lubricooling conditions on machining forces and surface roughness in radial grooving // 5. Smart pedagogy: Focus on the prospects and challenges of the flipped classroom approach in Nigerian architectural education // 6. Antifungal effectiveness test fragrant leaf ethanol extract (Pandanus Amaryllifolium Robx) against fungus Pityrosporum Ovale in vitro // 7. Assessment of compliance with NR-20 in a distributor of fuels derived of petroleum and biofuels 

  • Vol. 7 No. 30 (2021)

    1. Financial and environmental efficiency assessment model of seven Iranian chemical industries // 2. Dispersion and turbulence: A close relationship unveiled by means of state function // 3. Detection of plant leaf diseases using recent progress in Deep Learning-Based identification techniques // 4. Design and analysis of QCA adder circuits for efficient computation // 5. Determination of Naturally Occurring Radioactive Materials-norm (RA-226, RA-228) in synthetic flowback developed at laboratory scale from rocks of the la LUNA-1 well, colombia, and benchmarking with Marcellus and eagle ford shale plays // 6. Isolation, molecular identification and enzyme activity of amylase producing thermophilic bacteria from hot springs // 7. Catchment scale assessment of pollution threats to water quality in relation to prevalence of water-borne diseases in some communities in Omu-Aran, Nigeria // 8. Life-Cycle Cost Analysis (LCCA) comparison of pavements (Flexible, rigid and rigid-admixed with cow bone ASH)

  • Vol. 7 No. 29 (2021)

    1. The influence of performance expectancy on e-procurement adoption model in developing countries: Tanzanians perception // 2. Mine subsidence prediction using gene expression programming based on multivariable symbolic regression // 3. Application of statistical process control (SPC) in the volume variation of a volatile liquid fuel // 4. A symbolic attribute-based access control model for data security in the cloud // 5. Determination of factors affecting the consumption behavior of ornamental plant consumers: Şanliurfa sampling of Turkey // 6. Framework for total productive maintenance for an SME // 7. Evaluation of distribution transformers based on power quality parameters in front of different load profiles //

  • Vol. 7 No. 28 (2021)

    1. Statistical analysis for the financial report from energy stream/revenue in Iranian small and medium-sized industries // 2. Pro-Athlete: A guide system for visually impaired athletes in Olympic track race // 3. Analysis of Power Quality parameters at comparing UPS of different Technologies // 4. Identifying the challenges to sustainable higher educational institutions commute // 5. Modeling a closed control mesh for calender using MATLAB: Case study at stinfer art in steel // 6. Strategies to reduce costs in the planning of house building projects with government financing for low-income populations // 7. The analysis of the recent periods of oat market in Turkey // 8. GSM based smart fire and high-temperature detection system // 9. Reforestation and recovery of degraded areas of the Tarumã-Açu watershed and its contribution to reducing greenhouse // 10. Long-term sustainable energy plan to reduce air pollution in the Republic of Moldova // 11. Annual effective dose from radon-222 concentration levels in underground water in Bungoma south sub - county, Kenya

  • Vol. 7 No. 27 (2021)

    1. Comparison of maximum power point tracking techniques used in photovoltaic system // 2. Scada system for chemical water treatment plant of the thermoelectric power plant “José Martí” // 3. Road safety status and some initiatives in Nepal // 4. Moving vehicle detection from video sequences for Traffic Surveillance System // 5. Predicting protein secondary structure based on ensemble Neural Network // 6. The analysis of the recent periods of wheat market in Turkey // 7. Open-source software in emerging technologies for economic growth

  • Vol. 6 No. 26 (2020)

    1. Biodiversity conservation initiative in Nepal // 2. Addition of high esterification pectin as a stabilizer in the production of low fat yogurt // 3. InGuia: An incentive to the tourism development in Manaus with a Digital Platform supports // 4. A proposal to design and develop a microwave weed controller for agricultural use // 5. The emergency architecture - Reuse and recycle material after disasters // 6. The impact of motor starting on the quality of the industrial electricity network // 7. Base isolation of multi-storied building using lead rubber bearing // 8. Lean construction as a panacea for poor construction projects performance // 9. Natural radioactivity and external dose rates in tailing samples from Rosterman gold mine, Kakamega county, Kenya // 10. Potential of seed oil of Hildegardia Barteri (mast.) Kosterm for Biodiesel Production // 11. Non-ideal flow model for a tubular reactor and a stirred tank reactor in-series, using stimulus-response techniques

  • Vol. 6 No. 25 (2020)

    1. A system proposal for automated data cleaning environment // 2. Preventive diagnosis of photovoltaic facilities based on the interpretation of infrared images // 3. A cooperative game theory application in chicks brood food allocation by using shapley value method in good years data // 4. Testing and validating a tool to measure product involvement from its antecedents // 5. Insulating protective cover for live working: main causes of rejection under laboratory conditions // 6. Design and tuning of PID algorithm for optimum performance of PVTOL system // 7. Behavior of biomaterials in relation to the conservation time and temperature: stability test of a bioproduct

  • Vol. 6 No. 24 (2020)

    1. Biomaterials and essential oils as promising tools for public health problems in Brazil: Preliminary study // 2. Assessments and expertise of the pathological manifestations of a residential complex located in the Square 14 of January neighborhood in the city of Manaus // 3. Robust coordinated design of AVR+PSS using quantum particle swarm optimization // 4. Adsorption kinetics of phenol from aqueous solution using sugarcane bagasse ash as low-cost adsorbent material // 5. Systematic Mapping Approach to Support Administration Quantitative Research // 6. Application of operational research in process optimization in the cement industry // 7. Proposal of computational tool do support maintenance decision for electric power grids // 8. Reverse post-consumption cycle for a paper items manufacturing industry // 9. Infiltration: The disease of the structure // 10. Design performance of lead and lag compensator using OPAMP and root locus approach through simulation tool

  • Vol. 6 No. 23 (2020)

    1. Object defect detection based on a vision system with a microcontroller and an Artificial Neural Network // 2. The outsourcing urban mobility in Industry 4.0 and the challenges faced by the category of workers in search of rights and occupational safety // 3. Estimation of thermophysical properties of vegetable oils for creation database to engineering calculations // 4. Analysis and optimization of traffic congestion at single intersection using MATLAB and Arena Simulation // 5. Reducing environmental noise in the motorcycle test sector // 6. Comparison of brazilian standards for the qualification of three-phase induction motors against a global scenario // 7. Development of anti-theft offline GPS tracker 

  • Vol. 6 No. 22 (2020)

    1. Automation engineering service for corn steeping and wet milling processes, in factory of glucose and corn derivatives (GYDEMA): Cienfuegos, Cuba // 2. An analysis of using a mix of clayey materials and cement mortar in sealing masonry cracks // 3. Developing a linear programming model to maximize profit with minimized lead time of a composite textile mill // 4. Development of a low-cost measuring system for the monitoring of environmental parameters that affect air quality for human health // 5. Effects of electromagnetic interference caused by lighting technologies in BB-PLC systems // 6. Application based on fuzzy logic to evaluate implementation of TPM in industries // 7. Analysis of an audit and expertise in a civil construction company located in the city of Manaus/AM 

  • Vol. 6 No. 21 (2020)

    1. Comparison between decision tree and optimal power flow techniques applied to voltage corrective control in electric systems // 2. Instability, frequency and voltage in Manaus // 3. Residential Smart Plug with bluetooth communication // 4. Reuse of solid waste in a steel company from Minas Gerais: Process, benefits and restrictions // 5. Water and oil automatic separation system using fuzzy control // 6. Wastewater reuse in the Clean in Place process of a beverage industry // 7. Duties, powers and responsibilities of the expert engineer of technical assistants in judicial decisions with the construction industries // 8. Major challenges facing cloud migration // 9. Mapping process improvement and sequencing analysis for productive definitions: A case study in a metallurgical industry

  • Vol. 5 No. 20 (2019)

    1. Selection of thick coal seam mining method using analytic hierarchy process  // 2. PDCA application as a management tool in professional qualification course // 3. Importance of work safety in professional qualification courses: Reduction in labor accident rate // 4. Use of individual protection equipment in civil construction // 5. Management integration plan in a civil construction company // 6. The system for the study of health and the safety of the population on water quality of the Cachoeira Grande water located in the São Jorge neighborhood in Manaus city // 7. Proposal for intervention through REBA for the prevention of work-related osteomuscular disorders (WRMS) // 8. Improvement of the construction process with implementation of regulatory standard no. 35 (NR-35) - Case study // 9. Implementation of a waste management plan in the construction site in Manaus-Case study // 10. Revitalization project management: A case study in the campos elísios set square // 11. Dimensioning of walkway in reinforced concrete // 12. Application of work safety standards for slab construction // 13. Occupational stress and its influence on labor performance: A case study on ecoart structure and production // 14. Emergency routes in one shed in case of sinister  // 15. Work safety and the relevance of training of personal protective equipment (PPE) in the civil construction industry (CCI) // 16. Analysis of accertability of public works budgets: Case study // 17. Material transport to microwave oven lamp assembly // 18. Application of agrotoxics in the rural area of Pará // 19. Educational software development project - Educational Portal // 20. The feasibility of implementation of recruitment and selection techniques in a civil construction company Manaus - AM // 21. Management model and human resource management model of via satellite de communications LTDA // 22. Risk map and fire fighting project of via satellite communications LTDA // 23. Health damage to civil construction workers due to use and exposure to cement // 24. Planning and budget as a work and project control tool: Case study of the internal system of a central construction site in Manaus // 25. Elaboration of a fire prevention and fire fighting project in the Manaus-Amazonas city  // 26. Analysis of the use of personal protective equipment by small construction workers in the municipality of Presidente Figueiredo  // 27. Consequence of lack of work safety management in small constructors companies in the city of Presidente Figueiredo  // 28. The importance of PPE use in civil construction: Case study  // 29. The need for emotional intelligent leaders in business management  // 30. Occupational risk analysis in an electronic trade  // 31. Analysis of historical series of mamirauá lake level (Preliminary study)  // 32. Independent audit: How to deal with errors and frauds in civil construction industries  // 33. Evaluation of machining forces and surface integrity on AISI 304 steel top milling process under different cutting conditions 

  • Vol. 5 No. 19 (2019)

    1. Proposed implementation of protection systems against diesel engine failure (diesel engine runaway) // 2. Sizing and development of a prototype for the removal of wheels from heavy line vehicles // 3. Unveiling the industry 4.0 concept and the use of its technologies // 4. CEP application in an energy management equipment maintenance industry remotely // 5. Technical feasibility study of the implantation of a drainage system with the use of permeable asphalt, as an alternative for flood mitigation, in urban areas of Manaus // 6. Cloud computing: reducing costs in small and medium business // 7. Structuring and maintenance of stationary diesel engines: an alternative for the generation of electrical energy from thermal sources // 8. Industry 4.0: a theoretical contribution to the current scenario of technology in Brazil // 9. A proposal to use the TAGUI framework as an RPA tool // 10. Development of an automation system, integrating a virtual assistant and IoT devices // 11. The use of management tool as facilitator of the industrial maintenance plan // 12. Influence of the management of people in the production process of a motorcycle manufacturer of high cylinder capacity // 13. Study of the inspection of a flamotubular boiler through the codes asme and NR-13 // 14. Proposal for improvement in the configuration of the supply line in a motorcycle company in the city of Manaus-AM // 15. Renewable energy: wind energy, its effects and environmental gains // 16. Chemical, physical and mechanical properties of clayey soil with addition of carbide lime // 17. Real time energy consumption monitoring system using smart meters end arduino platform in residence // 18. Synthesis of grafite from amazonian residual biomass // 19. Improved wear on feed channel of gravity casting molds // 20. Reduction of scrap indicators through quality tools: A case study of a two-wheel segment metalworking industry // 21. The implementation of an environmental management system and its contributions to today's organizations // 22. Sizing and development of a prototype for the removal of wheels from heavy line vehicles // 23. The importance of ergonomics in the prevention of work accidents and their impact on economics and productivity // 24. Analysis of the waste recycling process for non-structural concrete manufacturing // 25. Efficiency increase in the axis drive process  // 26. Analysis of the water collection, treatment and distribution process in Benjamin Constant-AM city sanitation company // 27. The technical feasibility of the use of rubber chips in the production of permeable concrete for urban paving – Case study // 28. Optimization operational proposal organized public port of Manaus (OPPM): A case study // 29. Incorporation of civil construction waste and demolition in ceramic brick production as aim to decrease the quantity of raw material 

  • Vol. 5 No. 18 (2019)

    1. Environmental recovery and social and urban rehabilitation. characterization and decision factors for revitalization works of the mindu stream // 2. Study of the mechanical and physical characteristics of the permeable concrete using empirical dosage method // 3. Proposition of a lean flow of processes based on the concept of process mapping for a bubalinocultura based dairy // 4. Construction of a building tower using the integrated BIM platform with timelines for optimization of time // 5. Mechanical comparison between two brands of cp i-s-40 cement used in the city of Manaus-AM // 6. Comparative case study between the characteristics that the use of passive or active reinforcement in ribbed slab attributes to the construction of a garage building // 7. Structural reinforcement in pillars. a case study of structural recovery in condominial building // 8. Organizational disconnection and its impacts on the effectiveness of public cleaning in the municipality of Alenquer-PA // 9. System integrated management for stock management in a beverage distributor: a proposal based on a case study // 10. Application of quality and productivity improvement tools in a potato chips production line // 11. Influence of the compressive strength (FCK) in the analysis of concrete structures deformation // 12. Modeling faults of quadcopter aerial vehicle using petri nets // 13. Analysis of friction and wear coefficient in bearing steel with iron oxide nanoparticle lubricant // 14. Physical and mechanical analysis of the recovery of granite pétreos waste as added grafting in portland cement concrete // 15. BIM methodology applied to the preparation of management construction // 16. Using control charts for variables // 17. Analyzing the process of logistics (handling, storage and exposure) for the marketing of granjeir origrutes of the banana fair in Manaus // 18. Localization in Indoor Environments Using Virtualized Three-Dimensional Matrix // 19. Analysis of the Influence of Cure Types on Light Concrete with Expanded Polystyrene Pearls – EPS // 20. Evaluation of the partial replacement of river sand by structural ceramic block residues in conventional concrete // 21. Comparative Analysis for Viability of Paving Between Rubber and Conventional Asphalt // 22. Implementation of improvements in the condenser of the automotive conditioning system aiming for greater thermal comfort 

  • Vol. 5 No. 17 (2019)

    1. Using the effluent treatment station sludge in the manufacture of red ceramics at the Iranduba – AM ceramic pole //  2. Using the ABC curve as a tool for inventory management in a bakery and confectionery company //  3. Financial feasibility analysis in the implementation of a photovoltaic microgeneration system //  4. The contributions of ergonomics to the production of a chair adapted for children with disabilities //  5. Patterns Identification in the Consumption of Oracle Database Resources Using Weka Tool in Data Mining //  6. Proposal for optimization of a pull / push process follow-up of flexible packaging in the extrusion area //  7. Reverse Logistics: An analysis of the discarding of overdue supermarket products in the city of Petrolina-PE //  8. Industry 4.0: The use of industrial automation with the internet assistance of the things in the control of electricity via local network in the city of Manaus-AM //  9. Reverse logistics: feasibility analysis of the collection and restitution of lubricating oil used or contaminated //  10. Proposal for the implementation of a transport management system in a Manaus conveyor//  11. Case study on the application of quality tools in service level Management //  12. Frailty of urban stormwater drainage system in Mestre Chico Igarape affluent in Manaus //  13. Simulation as a tool for process capability analysis: A case study on a beverage resale //  14. Concrete curing analysis for high durability of structural concrete //  15. Study of the phenomenon of frailty of the Bead (MOLE) in the manufacture of bicycle tyres //  16. Study And Analysis Of a Bakelite Array Biocomposite Using Coconut Mesocarp Fibre And Tucumã Bark As Reinforcement //  17. MASP application in identifying the causes of delays in deliveries of UC’s links projects //  18. Extraction of residual phospholipids from defatted soybean meal //  19. Physical-mechanical performance of the concrete produced with fiber addition jute plant in the partial replacement of Portland cement in 0.5% and 1.0%  

  • Vol. 4 No. 16 (2018)

    1. System Supervisory for the Center Transmitter of Waves Mediates “Rebelde 670” //  2. Technical evaluation of cold water hydraulic system. A case study in the operant installation in popular housing built in the 1970s in the city of Manaus-AM //   3. Framework for creation of ChatBots by end user //  4. Physical and Chemical Characterization of Soil of Igarapé São Raimundo Left Margin – Luiz Anthony – Manaus – AM  //   5. Analysis of the efficacy of the sealing glass wool in drywall system with emphasis on acoustics //  6. Pavement condition indice determination – PCI – from Manaus’ integral bus station 1 //  7. Soil containment in retaining wall with masonry structural flexion in the city of Manaus: A case study //  8. Use of rainwater for non-potable purposes in teaching institution: A case study applied to CMEI Maria do Céu Municipal School in Manaus/AM //  9. Attainment of structural lightweight concrete by adding expanded vermiculite addition //  10. Irrigation system with treated domestic sewage effluent reuse for gardening and landscaping. A case study in a company of the electro-electronic segment of the Industrial Pole of Manaus //  11. Low Cost Automatic Series Linear Setup System //  12. Analysis of mechanical performance in concrete using as raw material waste of construction and demolition //  13. Analysis of the implantation of clayey material and superplasticizer additive in mortar //  14. Analysis of the economic viability of the prefabricated building system in a single-family residence //  15. Paradigm of Object Orientation in the C ++ Programming Language //  16. Analysis of the mechanical resistance of mortar produced with residue of red ceramics in substitution of aggregate kid //  17. Evaluation of the addition of steel fibers in lightweight structural concrete //  18. Dry construction technology, the use of OSB board in the replacement of conventional masonry //  19. Analysis of management of waste from civil construction: case study //  20. The traffic in the Gilberto Mestrinho complex road in Manaus city: A case study //  21. The Importance of Quality Management in Civil Construction Projects //  22. Waste management in civil construction //  23. Feasibility of using the light steel frame system in civil construction works in the city of Manaus/AM //  24. A proposal for sustainable surface drainage on hard floors //  25. An analysis of the new concept of asphalt mass of bituminous concrete machined to the hot with cold storage – CBUQ 182 //  26. BIM in bidding public works //  27. Comparative analysis between ribbed slabs and steel deck slabs in construction civil works in the city of Manaus //  28. Evaluation of the use of sugar in the mortar with emphasis in absorption of water //  29. The study of the rainwater drainage system at Getúlio Vargas Avenue in the historical center of the city of Manaus/AM //  30. Technical and economic feasibility of the use of rainwater for non-potable purposes for a residence in the city of Manaus/AM

  • Vol. 4 No. 15 (2018)

     1. Analysis of the solution for the economic load dispatch by different mathematical methods and genetic algorithms: Case Study //  2. Analysis and Operation of an Electric Power Micro-grid //  3. Simulation using MatLab of the behaviour of powerful electrical machine //  4. Comparative physical, mechanical and chemical analysis of concrete produced with malva vegetable fiber  //  5. LandGEM model collection and use system for estimating the potential energy //  6. Material Requirement Planning Using the Economic Order Quantity Model: An Application in a Perfumery and Cosmetics Company //  7. Application of a demand forecasting model in a rental company of billiard tables //  8. Analysis of physical arrangement and flow of the process in the classification sector in modern curtume //  9. The application of demand forecast models: case study on bearing factory //  10. Use of water treatment sludge in ceramic matrix for manufacturing bricks //  11. Virtual voice command assistant: Help for people with motor disabilities in the interaction with IoT objects of their residence //  12. A hybrid algorithm for parameter estimation of the short-ghrelin dynamics //  13. Mapping of processes as a tool for managing and controlling the production of bread in a bakery in Manaus //  14. Comparative study of the physical and mechanical properties between the conventional concrete using brita 0 and rolled pebble of the city of Manaus-Am //  15. The advantages of the Li-Fi application as an alternative to improve connectivity in areas with internet access, compared to the Wi-Fi system //  16. Rainwater catchment for non-potable purposes. A case study in an industrial laundry in the city of Manaus  //  17. Analysis of the Efficiency of Hearing Protectors to Sound Pressure Levels Applied in Mechanical Manufacturing Processes of a PIM company //  18. Reduced Setup Time for an SMT Line //  19. Verification of technical and environmental viability to apply ashletic emulsion preparation (EAI) in comparison with cm 30, on the southern axis: a case study //  20. Analysis of the environmental temperature according to the type of soil surface in the city of Manaus //  21. Comparative analysis after the implantation of a computerized CNC plasma cutting equipment at a shipyard in the city of Manaus – AMV //  22. Analysis environmental conditions of the technical sector of Teixeira Consultant based in NR 17: a case study //  23. Reduction of the indication of damaged cabinets //  24. Gray water reuse system from air conditioners for non-potable purposes: case study applied at the Secretary of State of Finance – SEFAZ headquarters building in the city of Manaus-Am //  25. Didactic Prototype for Spectral Signature Identification and Vibrations in Small Equipment  //  26. Applications and Advantages of the Internet of Things (IoT) at Industry //  27. The use of Drywall in inner vertical seals: advantages and disadvantages against the common masonry system in Brazil //  28. The importance of managing work safety for company poductivity //  29. Implantation of improvements in high voltage switchgears, aiming to avoid chronic or premature defects

     

  • Vol. 4 No. 14 (2018)

    1. Streamflow forecasts due precipitation water in a tropical large watershed at Brazil for flood early warning, based on SWAT model // 2. PI and PID Temperature and Product Concentration Control in a Chemical Plant producing propilenglicol // 3. Forecast of the volume of sales index in the Brazilian petroleum sector using artificial neural networks // 4. Deposition flow of Mercury and Selenium in Hair of riverine in habitants of the Amazon, Brazil // 5. Object detection algorithm for a mobile robot using Android // 6. Analysis of the Babassu as a source of biomass for the production of Briquettes in the Mid-North Region of Brazil // 7. Evaluation of organic and chemical fertilizer in the recovery of degraded areas arising from the mineral exploration // 8. SmartGrid proposal in communities of Guama Municipality of Santiago de Cuba Province // 9. The effect of the introduction of random censorship in the analysis of arthropod-prague survival time // 10. Using linear programming in balanced food design at minimum cost for cattle // 11. Implantation of quality tools in the productive process of tucupi and by-products // 12. Indicators world class in vehicles for tourism // 13. Analysis of physico-chemical parameters of waters of the micro basin of the igarapé of the forty in the city of Manaus // 14. Application of the PERT-CPM tool for analysis of the scenario of the production process of a bakery .

  • Vol. 4 No. 13 (2018)

    1. New features in dynamic optimization with EcosimPro(TM) // 2. Advisor system efficiency of the thermoelectric power plant “10 de octubre” // 3. Analysis of RF 433 MHz communication in home monitoring prototype // 4. A hardware-software architecture for computer vision systems // 5. Application of the TIC’s in the design // 6. Diseño formal sobre GHENeSys IEC-1131 compatible de sistemas de eventos dicretos con PLCs // 7. Seguridad y confiabilidad del aislamiento eléctrico // 8. Control por Modelo Dinámico Inverso de Simulador de Conducción de 2 Grados de Libertad // 9. Implementación del sistema scada en la fábrica central de licores // 10. Selección del procedimiento de contaminación artificial para el aislamiento polimérico en las condiciones del medio atmosférico en Cuba // 11. Diagnóstico de fallos empleando una red neuronal artificial Hopfield ante datos incompletos // 12. Modelado y simulación del proceso de evaporación al vacío através de interfaces gráficas // 13. Desarrollo de un modelo de línea aérea con parámetros no uniformes para estudios de coordinación de aislamiento // 14. Modelo Dinámico de 6 GDL para un Catamarán // 15. Caracterización del crecimiento de cristales en un evaporador-cristalizador mediante procesamiento digital de imagen utilizando el filtro sobel // 16. Análisis de la cadena de valor de la lana de Ovej a en España y su posible uso en cultivos de invernadero // 17. La gobernanza en la agricultura urbana: retos y oportunidades // 18. Estudo de coordenação e seletividade em disjuntores // 19. Evolución de la cadena de suministro de aceite comestible en Cuba // 20. Análisis de la disposición técnica de los vehículos automotores como vía de valoración del fin de vida útil // 21. Diseño de un regulador de frecuencia, para pequeñas centrales hidroeléctricas en operación aislada // 22. Gerenciamento de redes heterogêneas através da implementação de uma topologia utilizando a linguagem de programação python e a tecnologia de redes definidas por software // 23. Estrategia de Control Multivariable para una planta frigorífica // 24. Herramientas para el diseño de un sistema inmótico en el bloque habitacional de un hotel cinco estrellas plus // 25. Análise comparativa entre os índices aferidos pelo SINAPI e os adotados por empresas da cidade de Manaus nos serviços de produção de concreto e armação // 26. Estudo do efeito da carbonatação no concreto produzido com fibra vegetal (buriti) .

  • Vol. 3 No. 12 (2017)

    1. Algoritmo cultural com busca local avaliado através de testes estatísticos não paramétricos // 2. Diseño de sistemas de control para fermentadores en el Centro de Inmunología Molecular // 3. Um Algoritmo Evolutivo para Aplicação na Compensação da Potência Reativa em Redes de Distribuição de Energia Elétrica // 4. Optimización del cálculo de campo electromagnético inducido debido a una descarga atmosférica // 5. Comparação entre os diferentes softwares para projetos de plantas fotovoltaicas: Estudo de caso // 6. Industrial Processes Automation in the Pilot Plant at the University of Camagüey // 7. Aplicação do algoritmo do lobo cinzento (GWO) na sintonia de um controlador PID em um sistema de controle retroalimentado // 8. Modifications performed to the Fermenter R1 at the Molecular Immunology Center // 9. Estudo térmico // 10. Métodos Modernos de Diagnostico en Transformadores de Potencia, Basados en la Polarización Dieléctrica // 11. Biojóias – transformando ideias em negócio sustentável // 12. Detección en Línea de Descargas Parciales en Accesorios de Cables de Media y Alta Tensión mediante Emisiones Acústicas // 13. Verificación de las Condiciones Operativas de un Cable Submarino Clase 35 kV // 14. Web-monitoring module for the Xilema Suria video surveillance system // 15. Modificaciones al proyecto de automática del grupo electrógeno Hyundai en el Cayo Santa María.
26-50 of 61