Performance Enhancement of FACTS Systems Using Multi-Level NPC-STATCOM With DQ-PI Control

Autores/as

  • Nerziou Madani L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, Algeria.
  • Bouanane Abdelkrim L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, Algeria
  • Yahiaoui Merzoug L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, Algeria.
  • Addadi Zoubida L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, AlgeriaRemover L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, Algeria
  • Raouti Driss L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, Algeria
  • Tahtah Abdelkarim L.G.E Laboratory, Department of Electrical Engineering Faculty of Science and Technology, Dr. Moulay Taher University of SAIDA, Algeria
  • Boukhalfa Mohamed ZianeAchour University of Djelfa, 17000, Djelfa, Algeria
  • Nassour kamel 8Electrotechnical Engineering Laboratory University of Sidi Bel Abbes Djillali liabes Sidi Bel Abbes, Algeria

DOI:

https://doi.org/10.5935/jetia.v12i61.4086

Resumen

Flexible AC Transmission Systems (FACTS) are essential for improving stability, reliability, and efficiency in modern power networks. This paper examines the use of multi-level Neutral Point Clamped (NPC) converters in STATCOM devices to enhance voltage regulation and power quality under diverse load conditions. A comparative study of 3-, 5-, and 7-level NPC converters is presented, combined with a PI-based dq-frame control strategy for reactive power compensation. MATLAB/Simulink simulations under various scenarios—including voltage dips and inductive/capacitive load changes—demonstrate the effectiveness of the proposed approach. Results show that higher-level NPC converters significantly reduce harmonic distortion (down to 0.93% with a seven-level NPC), improve voltage stability at the point of common coupling, and ensure reliable operation in both inductive and capacitive modes. The findings highlight the potential of multi-level NPC-based STATCOMs as a practical and efficient solution for enhancing power transmission performance and supporting modern grid requirements.

Descargas

Los datos de descarga aún no están disponibles.

Publicado

2026-10-19

Número

Sección

Articles

Cómo citar

Performance Enhancement of FACTS Systems Using Multi-Level NPC-STATCOM With DQ-PI Control. (2026). ITEGAM-JETIA, 12(61), 1166-1177. https://doi.org/10.5935/jetia.v12i61.4086

Artículos más leídos del mismo autor/a