Physical-mechanical performance of the concrete produced with fiber addition jute plant in the partial replacement of Portland cement in 05% and 10%

Bianka   Caroline Cunha   Firmino; Murilo   Ferreira dos   Santos; Darlei   dos anjos   Lavor; David   Barbosa de   Alencar; Larissa   de Sá   Sousa; Edson   Andrade   Ferreira

Skip to main content Skip to main navigation menu Skip to site footer

Physical-mechanical performance of the concrete produced with fiber addition jute plant in the partial replacement of Portland cement in 05% and 10%

Bianka Caroline Cunha Firmino
Murilo Ferreira dos Santos
Darlei dos anjos Lavor
David Barbosa de Alencar
Larissa de Sá Sousa
Edson Andrade Ferreira

Downloads

Download data is not yet available.

PDF (Português (Brasil))

Published

2019-03-01

How to Cite

Firmino , B., Santos , M., Lavor , D., Alencar , D., Sousa , L., & Ferreira , E. (2019). Physical-mechanical performance of the concrete produced with fiber addition jute plant in the partial replacement of Portland cement in 05% and 10%. ITEGAM-JETIA, 5(17). Retrieved from https://itegam-jetia.org/journal/index.php/jetia/article/view/321

Download Citation

Issue

v.5 n.17 2019

Section

Articles

Most read articles by the same author(s)

Joseci Oliveira de Holanda , José Roberto Abreu , Darlei dos Anjos Lavor , Case study of the effects of the conventional concrete carbonating produced in three different cement factorys , ITEGAM-JETIA: v.2 n.8 2016
Adriana Lima Lindoso , José Roberto Lira P. Júnior , Luiz Felipe de Araújo Costa , Mauro Cesar Aparício de Souza , David Barbosa de Alencar , Antonio Estanislau Sanches , Proposal for optimization of a pull / push process follow-up of flexible packaging in the extrusion area , ITEGAM-JETIA: v.5 n.17 2019
Kelly Moraes Nunes , José Roberto Lira P. Júnior , Luiz Felipe de Araújo Costa , Mauro Cesar Aparício de Souza , David Barbosa de Alencar , Antonio Estanislau Sanches , Proposal for the implementation of a transport management system in a Manaus conveyor , ITEGAM-JETIA: v.5 n.17 2019
Leilson Nascimento de Oliveira , Charles Ribeiro de Brito , Giuliana Leitão Oliveira , David Barbosa de Alencar , Manoel Henrique Reis Nascimento , Concrete curing analysis for high durability of structural concrete , ITEGAM-JETIA: v.5 n.17 2019
Alexandre de Pina Braga , Adelaneide Gomes de Lima , Murilo Ferreira dos Santos , Thiago Manuel Gonçalves dos Santos , David Barbosa de Alencar , Antonio Estanislau Sanches , traffic in the Gilberto Mestrinho complex road in Manaus city: A case study (152-156) , ITEGAM-JETIA: v.4 n.16 2018
Bruna Caroline da Silva Rocha , Charles Ribeiro de Brito Jorge , Jorge Luis Melo de Freitas , David Barbosa de Alencar , Manoel Henrique Reis Nascimento , Jorge Almeida Brito Junior , Importance of Quality Management in Civil Construction Projects (157-164) , ITEGAM-JETIA: v.4 n.16 2018
Elzimara Lima Cordeiro , Charles Ribeiro de Brito , David Barbosa de Alencar , Manoel Henrique Reis de Oliveira , Carlos Alberto Oliveira de Freitas , Jorge Almeida Brito Junior , Waste management in civil construction (165-172) , ITEGAM-JETIA: v.4 n.16 2018
Arliane dos Santos Farias , Charles Ribeiro de Brito , David Barbosa de Alencar , Manoel Henrique Reis de Oliveira , Jorge Almeida Brito Junior , Antônio Estanislau Sanches , Feasibility of using the light steel frame system in civil construction works in the city of Manaus/AM (173-178) , ITEGAM-JETIA: v.4 n.16 2018
Antônio Ferreira da Silva , Suzana da Silva de Oliveira Martins, Charles Ribeiro de Brito , David Barbosa de Alencar , Manoel Henrique Reis de Oliveira , Jorge Almeida Brito Junior , proposal for sustainable surface drainage on hard floors (179-181) , ITEGAM-JETIA: v.4 n.16 2018
Ilidiane Correia de Oliveira , Giuliana Leitão Oliveira , Maria do Perpétuo Socorro Lamego Vasconcelos , David Barbosa de Alencar , Manoel Henrique Reis de Oliveira , Antônio Estanislau Sanches , BIM in bidding public works (190-196) , ITEGAM-JETIA: v.4 n.16 2018